Precision Lost wax casting impeller for pump

Short Description:

The impeller of water pump is made of casting. The blade on the pump impeller plays an important role. The shape and size of the pump impeller are closely related to the pump performance. Pump impeller can be generally divided into single suction type and double suction type, single suction impeller for single side suction, small flow pump impeller for this type. Double suction impeller for both sides of the suction, large flow pump impeller are used double suction impeller.


Product Detail

Product Tags

Product Name Material Dimension Application Casting tolerance Weight
1 Precision casting impeller for pump AISI 316L  120 mm Pump  0.02mm 550 g

 

Description

What is a pump impeller?

The rubber impeller provides cooling water to the cooling system by sucking in the water from the water inlet and leading it to the water outlet of the water pump... And if the water pump is overheated, the performance of the engine will be reduced.

Is pump and impeller the same thing?

Popularly speaking, the impeller is the rubber material inside the pump, which is used to promote the water flow. The water pump is a complete assembly. Unless the gasket, O-ring, etc. are damaged or the housing is damaged, it is usually only necessary to replace the impeller.

How do I know if I need a new impeller?

When the impeller needs to be replaced, the internal temperature of the motor rises, and the equipment stops sucking cooling water and extracting warm water. This eventually leads to overheating, leaving a distinct charring mark on the motor.

Processing Steps

Drawing→ Mold → Wax injection→ wax tree assembling→ Shell moulding→ Dewax-buring→ pouring→ Shell removing→ Cuttiing-Griding→ Machining → Deburring  → Surface Finishing → Assembly → Quality Inspection→ Packing


  • Previous:
  • Next:

  • Write your message here and send it to us